Section 1
PRODUCT IDENTIFICATION
| PRODUCT NAME OR NUMBER | Skate Away Floor Finish |
| PRODUCT DESCRIPTION | 18% Floor Finish |
| CHEMICAL FAMILY | N/A |
| D.O.T. PROPER SHIPPING NAME | N/A |
| SHIPPING ID NUMBER | N/A |
| HAZARD CLASS | N/A |
| HMIS RATING | Health-1, Flammability-0, Reactivity-0, See section 8 for protective clothing. |
Section 2
HAZARDOUS INGREDIENTS / HAZARD DATA
| CHEMICAL NAME(S) | CAS NUMBER | TLV-TUA | PEL |
| Polyethylene Wax Emulsion | N/A | N/A | N/A |
| Acrylic Copolymer Dispersion | 63744-68-3 | N/A | N/A |
| Resin Solution | N/A | N/A | N/A |
| Tributoxy Ethyl Phosphate | 789-51-3 | N/A | N/A |
| Diethylene Glycol Monomethyl Ether | 111-77-3 | N/A | N/A |
| This product contains no other ingredient considered hazardous according to the criteria of 29 CFR 1910.1200, OSHA | |||
Section 3
PHYSICAL DATA
| BOILING/MELTING POINT @760 nm Hg | 212½ F |
| pH | 9.0 - 9.5 |
| VAPOR PRESSURE mm Hg @ 20½ C | 20mn Hg @ 68 F. |
| VAPOR DENSITY (Air = 1) | >1 |
| PERCENT VOLATILE BY WEIGHT (%) | 80+ |
| SPECIFIC GRAVITY OR BULK DENSITY | 1.03 |
| SOLUBILITY IN WATER | Complete |
| EVAPORATION RATE (BuAc = 1) | <1 |
| APPEARANCE | Thin milky liquid |
| ODOR | Characteristic odor |
Section 4
FIRE AND EXPLOSION HAZARD DATA
| FLASH POINT ½F (Test Method) | N/A |
| AUTOIGNITION TEMPERATURE | N/A |
| FLAMMABILITY LIMITS IN AIR (% V) | N/A |
| EXTINGUISHING MEDIA | N/A |
| SPECIAL FIRE FIGHTING PROCEDURES | N/A |
| UNUSUAL FIRE & EXPLOSION HAZARDS | N/A |
Section 5
HEALTH HAZARD DATA
EFFECTS OF OVEREXPOSURE
| SKIN CONTACT | Prolonged or repeated contact may cause dermatitis. |
| EYE CONTACT | Eye irritant. May cause redness or swelling. |
| INHALATION | N/A |
| INGESTION | May be irritating to the mouth, throat, and gastrointestinal system. Vomiting and diarrhea expected with large doses. |
| CHRONIC EFFECTS OF OVEREXPOSURE | None |
| TOXICOLOGICAL TEST DATA | N/A |
Section 6
EMERGENCY AND FIRST AID PROCEDURES
| SKIN | Immediately wash with plenty of water for at least 15 minutes. Remove contaminated clothing and footwear. Wash clothing before reuse and discard footwear which cannot be decontaminated. Seek medical attention immediately. |
| EYES | Immediately flush eyes with large amounts of water for at least 15 minutes forcibly holding lids apart to ensure flushing of entire surface, then seek medical attention immediately. |
| INGESTION | Never give anything by mouth to an unconscious person. If swallowed, do not induce vomiting. Give large quantities of water.Then seek medical attention immediately. |
| INHALATION | Remove to fresh air. If breathing is difficult have trained person administer oxygen. If respiration stops, give mouth to mouth resuscitation. Get medical attention. |
Section 7
REACTIVITY DATA
| PRODUCT STABILITY | Product is stable under normal conditions. |
| Stability Conditions to Avoid | none |
| CHEMICAL INCOMPATIBILITY | none |
| HAZARDOUS DECOMPOSITION PRODUCTS | none |
| HAZARDOUS POLYMERIZATION | None |
| Polymerization Conditions to Avoid | N/A |
Section 8
SPECIAL PROTECTION INFORMATION
| RESPIRATORY PROTECTION | No special requirments |
| VENTILATION | Provide local exaust to keep TLV of section 2 ingrdients below acceptable limit. |
| PROTECTIVE CLOTHING | N/A |
| EYE PROTECTION | N/A |
| OTHER PRECAUTIONS | N/A |
Section 9
ENVIRONMENTAL DATA
| SPILL OR LEAK PROCEDURES | Mop up or otherwise absorb and hold for disposal. |
| WASTE DISPOSAL METHOD | Any method in accordance with applicable laws. |
| CONTAINER DISPOSAL | Please recycle empty containers whenever possible. |